Kreg Owners' Community

My wife usually comes up with ideas of things for me to build. These "ideas" sometimes are "thinking out of the box" ideas. She recently decided that I should build her a new coffee table. Well . . . after I was finished she decided that I should build a matching end table and sofa table. So about two months later I finally completed all three pieces of furniture. I just can't say enough about the Kreg products. I just don't know how I existed before I purchased a set and began using the pocket hole jig set. This is truly an amazing product in ease of use and time saved making strong joints.

Views: 626

Attachments:

Reply to This

Replies to This Discussion

thats looks excellent you did a wonderful job
Thanks James. I might check with my local Kreg Distributor about having it sharpened. I might buy another one so I have a sharp bit on hand at all times.

James Waller said:
Dennis, Kreg has their own sharpening service. Maybe the Kreg rep here can help you out with some info and maybe prices.
Thanks!

Curt Barrett said:
thats looks excellent you did a wonderful job

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_