Did thje kreg site do away with the blog postings , for some reason they are not showing up when I go to the home page
Tags:
Ray,
After a few months of watching and analyzing how users were using the blogs, it was determined that there was virtually no one using the blogs correctly - but rather just as an alternative to posting forums. They've been taken down temporarily, but depending on community feedback I will get them added back. Please let us know what you think of the change and how much or how little value you see the 'blog' section of this community adding to the site. Your input is much appreciated.
KregRep
Ray,
After a few months of watching and analyzing how users were using the blogs, it was determined that there was virtually no one using the blogs correctly - but rather just as an alternative to posting forums. They've been taken down temporarily, but depending on community feedback I will get them added back. Please let us know what you think of the change and how much or how little value you see the 'blog' section of this community adding to the site. Your input is much appreciated.
KregRep
Does this mean a person can't start a blog; that they've been done away with, or that they just can't be found on the home page? I've been searching the community site for days trying to find out how and where to start a blog, so my vote is to have blogs here.
I'm currently working on a rather ambitious project that I'd like to share in the form of a blog, but not if no one can find it. I'm rebuilding my pop-up camper from the frame up. I've been taking pre-construction photos and stages of construction progress photos with dialog as I go.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service