Hello Everyone, I work for a company that needs to have small pieces held in place and I was thinking of using a Kreg clamp. The issue is the clamp would need to be made of Stainless Steel so it can be sterilized. Does anyone know if the Kreg tools are built of Stainless Steel or are they some other grade? Any input would be appreciated.
Tags:
Just how small of a piece are you talking about? Going to be tough finding medically approved equipment in a home improvement department. That said, I have a couple of sets of hemostats that are really handy for clamping/holding very small pieces. Kinda have my curiousity arroused now though, will do a bit of googling
"1x1/8x1x1/2"
??? don't understand the dimensions exactly.
What kind of material and what kind of machining do you need done? Maybe just need a way to hold it down, or to keep it from sliding around?
Sorry about that, I tried to reply from my phone and I missed that extra 1 in there. It should read 1"x1/8" x 1/2". The material is bone and yes we are trying to keep it held in a jig so we can cut it using a band saw to the shape of the jig. I know that there are clamps made of stainless steel out there, but I have a Kreg bench clamp that I thought would work well to hold the piece in place.
Daniel,
I'm sorry to inform you that our clamps are not made out of stainless steel. They are normal case hardended steel which we would not recommend for your application. If you have any other questions please let us know.
Hi Dan - by sterilized, can they be sterilized through a chemical bath such as alcohol or must they be autoclaved?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service