Kreg Owners' Community

Working on a project where i laser etched an image and then used shoe polish as a filler to darken the etching.  was wondering if anyone has used this technique and then used a spray lacquer/poly to put a shine/seal it in? 

 

i did make a test piece and am more concerned if it would work and how long it would possibly hold up?

 

John

Mongo's Workshop

 

https://www.facebook.com/#!/pages/Mongos-Workshop-by-J-Cason/195401...

Views: 1811

Reply to This

Replies to This Discussion

I have made signs with a router and used a magic marker to darken the letters and sprayed lacquer over it and it worked just fine not sure about the shoe polish. 

In Cherokee N.C. There is a lady that sells signs and things she makes using shoe polish, I got one for my in-laws camper, (sign with their name and home town) and it has done great for almost 2 years now. It is out in the weather all summer and part of the winter. Poly'd over the shoe polish.

After applying the shoe polish spray two light coats of clear shellac. Let dry and cure. Next apply your coats of non-poly lacquer. Let dry and cure. If item is to be used out doors then subitistute with marine grade varnish. All of these finishes should be sprayed on for best finish. Watch your temps and humidity factors and mixing ratios. Do not forget your viscosity as well and test before applying.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_