Hi all heres one too get those heads scratching.Been trying too make a finger jiont jig for my router table,why i hear you ask ?whats up with a dado set on the tablesaw?Well dado sets are illegal here in the U.K.so much so tablesaw arbors/spindles are designed so they wont accomadate dado sets [as far as i know].I have attempted too make the aforesaid jig twice failed.Second time was better, jionts tight tails sticking out just enough for sanding.But the top edge of the workpiece 1/4" above the top jiont and the bottom edge minus 1/4" if that makes sense.What am i doing wrong guys? The only thing i can come up with is i need to make some sort of micro adjuster any ideas gratefully recieved ,before i throw it out the window again.
Tags:
Michael what happened with your design it looked good and I was going to comment but it disappeared. I was going to ask how the trials went. I have the jig that ken originally from rockler and I like that jig very well. Your jig looked like it would work well.
Gary no idea what happened, yet too try it out may need tweaking go steady.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service