Kreg Owners' Community

I plan on attaching kick plates to the front and back of a TV cabinet I'm building.  The sides of the carcase are 3/4" plywood with solid cherry edging and the kick plates are 3/4" cherry.  The ends of the kick plates are going to have rabbets that are 3/8" deep and overlap/cover the edge of the plywood.  I was planning on using the Micro-Jig and 1" screws but am uncertain as to what height to set the jig at.  I fear setting it to 3/4" will result in screws protruding through the face of the kick plate (the pocket screw holes are going in to the inside face of the plywood).  So, am I better off using the 5/8" setting or the 1/2" setting?  I really don't feel like going through a trial run on scrap wood.

Mitch Wilson

Views: 259

Reply to This

Replies to This Discussion

Hi, If your measurments are correct then the ply and the face frame have only and inch and a quarter of thickness. I would use the half inch setting on the jig with the one inch screws. But i would never make my work piece the test piece. I would strongly suggest a scrap piece first. In my opinion with the rabbit joint the chances of splitting are greater because of the rabbit it self. So i might would predrill first..
Im sorry i failed math in school LOL it is an inch and one eighth in thinness.
Thanks for both responses, Jeff. I had your math figured out already. Actually, the only critical measurement is the 3/8" thickness. The question becomes how far a 1" screw will go using the Micro-Jig. The instructions that come with the standard jig package indicate something like 0.421" penetration with a 1" screw, which is greater than 3/8" (0.375"-sorry, but my undergraduate degree was in math), but they don't tell you with the instructions for the Micro-Jig how far that screw is going out. You're technically correct and that I should do a test run, but I'm just a lazy SOB. Maybe the Kreg Rep can answer the question.

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Recent Workbench Survey Legitimacy

Yesterday, I received an email wanting my opinion on Kreg adding high end workbenches to their product line and wanted to know before I clicked the link if this is a legitimate survey or some phishing scam. Here's the link I was provided (…Continue

Started by JOHN W. GOETZ in Other Kreg® Products Dec 10, 2021.

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11, 2021.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service