Kreg Owners' Community

Does anybody have a parts list to change the pocket hole rear clamp to pneumatic conversion. I hate having to reach around back to clamp the piece. I bet if Kreg offer a reasonable priced kit it would sell. No I cant afford a Foreman for my home shop.Thanks Michael

Views: 438

Reply to This

Replies to This Discussion

Michael, that's a great idea and I may think about converting my K4 to pneumatic.  A small cylinder is available for less than $20, with a 2" stroke, double-acting.  A double-acting foot switch would be the best way to operate it so both hands are free.  A few brackets, hoses, connectors and some ingenuity would complete the job, for about $50 total.  The regulator on the compressor should allow fine-tuning the holding power without damaging the workpiece.  I will post some photos and details if I decide to do it.  Thanks for the idea.

Michael,

I'm sorry to inform you that we do not offer a kit like you are referring to.  I have heard of our customer's doing this but they did not supply us with a list of parts to do so.  If you do decide to do this, please feel free to share the parts list so others can follow suit if they wish.  

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Rip-cut ACS plunge saw

Just got a rip-cut and installed my Bosch saw haven't used it yet but saw was a good fit. Got the original ripcut and didn't really like it had trouble cutting straight. New one has several improvements should make it work much better. especially…Continue

Started by William Burt Brown in General Woodworking Mar 17.

Is the screw driver impact drill rater?

Is the screw driver impact drill rated?Continue

Started by Bob Naylor in Beginners' Zone Mar 10.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_