plans needed

Need plan for a storage rack for 12" vinyl albums. No crates, boxes, table top racks etc. -- spouse wants something along the lines of 50s wire racks. Suggestions appreciated.

Charlie

chasard@att.net

▶ Reply to This

Replies to This Discussion

Permalink Reply by Ken Darga on January 11, 2014 at 12:13am

wire-form rack photo

EX:

Make a rack from wood---size to suit your liking.

1x material for the bottom platform.

1/8" plywood for the dividers.

1x material for a back panel, to keep the dividers in place.

Spacing between dividers of 1".

Dividers fitted into dados and glued in place.

▶ Reply

Permalink Reply by Ken Darga on January 11, 2014 at 12:24am

Option(s):

▶ Reply

▶ Reply to Discussion

RSS

Welcome to
Kreg Owners' Community

Sign Up
or Sign In

Or sign in with:

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.

Videos

Miter Saw Workbench

Added by Mike Criss

The Ottoman with Secret

Added by Alex DrMaster

How to Build a Shaker Fireplace Surround - Woodworking

Added by Philip Miller

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.