Kreg Owners' Community

Sometimes opportunity just slaps ya up side the head.  I have made picture frames for some time in support of my Original Antique Map collecting and also do my own museum grade matting.  Today a woman at work whose husband is an accomplished local artist in the New Orleans Area approached me on behalf of her artist husband.  He was wanting some custom frames made for a showing in a few months.  Yes I am interested but have no idea how to charge for the service since I have only done it for my own benefit. While I want to be reasonable I do not want to give the service away.  It could lead to other work in the art community also.  Heck it may just pay for some new equipment!  Anyone have info?

Views: 411

Reply to This

Replies to This Discussion

Pricing work is always an issue, charge to much and you don't get the work or potential referrals, to low and you risk doing a lot of work with little upside. In my opinion or random thoughts, I would start at materials cost plus 20%. The reason I say this is it may lead to more clients and this guy may have the contacts. Plus it will put a little money in your pocket or pay for some other expenses. Another option could be to supply the frames, and if you have an idea of cost, when the artwork sells, you get your portion in return. Now if he isn't selling the work, then this really isn't an option. Good luck and I hope it works out.
Bryan is right,it's a fine line , what is too much or not enough.The time is yours but are you just building frames,what kind of finish and matting or is there a back or mounting tabs. The time should be close no matter what size the frames are.I think if your figure your total material cost then double it or 2.5 times would be a much better figure.

Did a bit of research tonight.  Local custom frame shops with store front overhead are getting 4 to 5 times material cost.  If they are able to buy molding in bulk lots of 300ft or more it is closer to 6 to 7 times their material costs.  Find no one creating their own molding but I imagine at the high end that may be an option.   

If you start doing more you can shop around,see what you save buying in bulk,as a builder and remodeler I know when I'm doing a project or custom piece I try to plan out what I have coming up and mostly try to buy in bulk or ordering for better prices,sometimes I will have to hold on to materiel for a bit but bulk is always better. I do this for lumber,materiel and hardware whenever it's possibly

Come up with a number for your time.  I build fitness equipment out of wood as a hobby.  My number is $100 and I tell people out the gate if you want a small item done it would be $100 + materials.  If you start off giving $25 deals for 5 hours of your labor that same person is going to be expecting that same hookup each time.  

I tend to agree with you Robert.  I ran a buis for more than 27 years and once you start giving your time away to a customer it is hard to go the other way.  That said:  I at times gave a small customer a fair discount to help them and to create word of mouth advertising.  You have to be upfront that you do not customarily give discounts and it is a one time event or that you would like them at a later date to reciprocate with more full value purchases.   

robert smith said:

Come up with a number for your time.  I build fitness equipment out of wood as a hobby.  My number is $100 and I tell people out the gate if you want a small item done it would be $100 + materials.  If you start off giving $25 deals for 5 hours of your labor that same person is going to be expecting that same hookup each time.  

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_