Kreg Owners' Community

I have recently been doing some work with butcher blocks and cutting boards, I am about ready to start on a larger butcher block table from a large pile of Cherry I have been sitting on, my question is, if I use a cherry Danish oil can I follow up with Mineral oil and still be food safe? any help would be appreciated..Thanks!!

Views: 1686

Reply to This

Replies to This Discussion

If your plan is to use as a cutting board, I would not use the Danish oil.  

The mineral oil does not seal the wood, nor would it keep the Danish oil from leaching even if the mineral oil was mixed with parafin.  

Your best bet may be some food safe coloring mixed with the USP mineral oil. I haven't tried coloring on the butcher blocks I've refinished, but I have heard it being done.

my only reasoning behind the Cherry Danish oil is to try to darken the Cherry a touch, maybe I should just leave the wood out in the sun for a few days

The cherry will darken on it's own. I would be afraid that if I colored it, it would get too dark after a while.

Leonard from experience of many years and several butcher block later I would not use any thing that would darken the cherry wood and or make it rancid.  I have used mineral oil in the past but found that there is a better finish that seals the wood better and is food safe.

What I use is Behlen Salad Bowl finish.  A quart cost is about the mid twenty dollar range and will go along ways.  The reason I use the salad bowl finish is that it is very durable and will withstand hot dish washer washing and will serve even better on a table top.

after seeing a fellow woodworkers Cherry projects, and seeing how it darkened on it's own, I believe I will go that route with either Howards mineral oil or the Behlen finish that jay recommended, thanks all

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Kreg Precision Router Lift

Help!!!  from anyone UK or Ireland side , I have purchased the Kreg router table with the Kreg Precision Router Lift, my problem is that I cannot find a router to fit with the correct motor diameter , the list supplied by Kreg for routers to suit…Continue

Started by Mick Ledger in Beginners' Zone on Wednesday.

Thickness error

I ripped a 2x4 board to be a true 3” instead 3.5”. The thickness of the board remains 1.5”. When I put the pocket hole in the board, the top of the hole was too high and now visible. In other words the top of the pocket was on the top of the board…Continue

Started by Ryan Ritter in Beginners' Zone Feb 26.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2023   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service