Kreg Owners' Community

I know it's a bit of an adventure, but I'm planning to build with cabinet where the hardwood frame is made from 1-5/16 (after planing) thick pieces. But, being stubborn, I'd still like to build it with Kreg Joints.


So, seems like I need 2" fine thread screws. Except, all I can find are 2" coarse thread - even on the Kreg website.


That makes me wonder if I'm being quite naive about it and should punt.




Why aren't there 2" fine thread screws? Just an issue of demand (like I may be one of very few to ever ask for them)?


Or, is there a structural reason why my plan of action won't work? I've mocked it up with 1.5" softwoods and everything seems pretty reasonable.



Views: 846

Reply to This

Replies to This Discussion

Thanks, James. Shorter pocket holes might work. Guess what I'd need to do is have the jig height set for 2 inch screws so that the screw comes out near the middle of the board for strength, but change my depth collar to drill a deeper hole so that the screw is split across the two boards.

Uh oh, i finally have to read the detailed directions about those calculations. :-)

Appreciate the help.


James Waller said:

I looked around and besides seeing "self-tapping machine screws", it seems there are no fine screws longer than 1½".


I presume creating shorter pocket holes to use the 1½" screws won't work?

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Recent Workbench Survey Legitimacy

Yesterday, I received an email wanting my opinion on Kreg adding high end workbenches to their product line and wanted to know before I clicked the link if this is a legitimate survey or some phishing scam. Here's the link I was provided (…Continue

Started by JOHN W. GOETZ in Other Kreg® Products Dec 10, 2021.

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11, 2021.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service