Can anyone tell me the actual difference in the K4 & the master system. Can't really tell by pictures. I went to Menards and purchased the K4 because they didn't have the MS. I couldn't wait and order online. Wondering what else I need to buy.
Tags:
The Master system includes a face frame clamp, vacuum adapter and a couple of other dodads
Thanks John,
I paid $99 for the K4 and was just wondering if I messes up by not getting the MS. It appeared you must get a larger case and a couple of items I couldn't identify. Must have been the material support stops. I didn't realize you get the mini in there as well.
Case isn't much bigger, the clamp doesn't fit. I have it attached to a board anyway and most of the bits are on that. I haven't used the stop block yet either. Haven't figured out an efficient way to use it with my shop setup.
James Thorne said:
Thanks John,
I paid $99 for the K4 and was just wondering if I messes up by not getting the MS. It appeared you must get a larger case and a couple of items I couldn't identify. Must have been the material support stops. I didn't realize you get the mini in there as well.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service