k2000 pro pack

[joey harris]

I know it's probably a long shot but I have a handed down k2000 pro pack. I've been using for a while and I can make do at times but I'm missing the riser block to drill 1 1/2 material. Just wondering if anyone had one laying around out of a pro pack they don't use. Pm me if you have one. I'm just trying to save some money for the time being

[KregRep]

You might check with our Customer Service department to see if any are available. You can reach them at 800-447-8638 or online here.

KregRep

[joey harris]

Kreg has discontinued all parts for the k2000. Contacted them weeks ago if I could find the exact specs of the block I'd just mill something at work one night.

[Jeff Metcalf]

Joey Harris;

One of the many Kreg Jigs I own is the K200 it is complete if you still need I could measure the 1/2 inch riser block so you can see if you can make one it is tapered on the sides like a dovetail. It sounds like you are a machinist so if you are I will send you the measurements in thousands of an inch.

 

Let me Know Jeff

[Jeff Metcalf]

Sorry Joey;

I meant the K2000 I believe it is the pro pack.

 

Jeff

[joey harris]

Yea if you have the specs send them on. I wouldn't worry about it much but I want to build bigger projects which require stronger joints. The spacer block will put my screw where it needs to be. Therefore stronger.

[Jeff Metcalf]

Jesse;

I think I measured the wrong one for you I did the 1/2 inch it looks like you wanted the 1 and 1/2 inch let me know and I will re do sorry it has ta\ken this long been tied up need to get it out of storage. The pictures with measurements are listed as a project.

Jeff