Tags:
I had a homemade table and a Sears bench top table and then I spent big money on the Hawk Routershop which was the most I ever wasted on a bad tool. Hawk is out of business now. So I have been studying every table I can for a good replacement. So far the Kreg looks like the best for self aligning to the miter slot. The MCLS and the design you mention will still have a little play in the t track and I believe will need careful measurement from the miter slot. Hopefully someone with these tables will weigh in.
Mark, I was just comparing to the Kreg fence which they advertise by the following: Table Saw Fundamentals
Unique self-squaring t-square style fence design – similar to those found on high-end table saw rip fences – allows the fence to be quickly and accurately adjusted parallel to the miter slot. Unique cam-style locking handle and opposite-side anchor ensures incredible fence rigidity.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service