Tags:
I'm Mike, live south of Peculiar, MO, on the south edge of the Kansas City metro. I am a retired railroad machinist and locomotive reliability center manager. I like to make, rather than buy, things. I like the Kreg tools.
I also fish. A lot.
Hello, my name is Ray and I live in Ontario, Canada. I have only been into DIY for the last year or so, when I had to take on a few jobs around the house, and i found that I quite enjoy it!! I recently purchased a Kreg 4 Master Jig and Hidden Hinge Jig and they have been very good for me to use in a couple of projects I have done. I thought I would join the Kreg's Community and try and learn how to do things properly as I move forward. So thanks in advance and I look forward to being a part of the Community.
Hello, my name is JD Macias. I live in Austin, TX. I like doing woodworking and getting back into the groove of it. I asked a question and hope someone will be able to answer it. I'd like to use the Kreg jig tool as much as possible because I like the way the projects come out well done and sturdy. I have two separate pieces of 3/4" plywood that I need to butt together and connect with a 1x4" board on the middle of that butt seam. Is there a way to use the Kreg tool to do this? Everything I've seen is mostly at a 90 degree angle. Mine's not. Thanks.
Hi my name is Jason I live in northern IL.
My wood working skills are low this was my 1st try at it and it was a blast.
I all ready have a bunch a projects lined up. mini wine bar, kitchen table.
All my ideas I have plans I found nothing of my own yet.
Hello, my name is JD Macias. I live in Austin, TX. I like doing woodworking and getting back into the groove of it. I asked a question and hope someone will be able to answer it. I'd like to use the Kreg jig tool as much as possible because I like the way the projects come out well done and sturdy. I have two separate pieces of 3/4" plywood that I need to butt together and connect with a 1x4" board on the middle of that butt seam. Is there a way to use the Kreg tool to do this? Everything I've seen is mostly at a 90 degree angle. Mine's not. Thanks.
Hi JD, yes as Roy replied it is possible to join board that are not at 90 degree angles.. I recently built a farm table and joined the table top together using the method that I think you are referring to. See first photo attached.
Hello, Pete F. That's correct. I see it and will try it. Thanks so much.
Pete F said:
Hi JD, yes as Roy replied it is possible to join board that are not at 90 degree angles.. I recently built a farm table and joined the table top together using the method that I think you are referring to. See first photo attached.
Hello, everyone! My name is Jill, and I am an ambitious (beginner) DIY woodworker. I dabble in "artsy" woodcrafting during the holiday season and mostly use a jigsaw to make basic things like indoor/outdoor Christmas decorations, wisdom word placards for my home (like "welcome", "family", "love", etc.), and picture frames for friends and family. I've been amassing basic power tools for years, and am ready to tackle furniture with my Kreg Jig and accessories. I'm hoping to pick up some tips and tricks from the discussion boards and make my first Kreg joint bookshelf for my daughter's comic book collection. My next project is to make a sofa table for my entryway--which will be my justification for asking Santa to bring me a table saw this year!
Hello from SE TN!
I like to tinker and have been a DIYer for a long time.
I have done some wood working projects here and there and most come out "ok" given the minimal tools that I have available.
Now I want to build a desk to hold a couple computers and monitors to go in my basement office.
I plan to buy a Kreg K4 to use with my desk project.
Now I just need a good plan.
Anyone know if the full plans for the Kreg "student desk" are still available?
I have searched all over and so far have only found a partial plan.
I would appreciate any information anyone has concerning these plans.
Thank you,
Joe
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service