Kreg Owners' Community

Hi

Does anyone have any experience attaching this to 3rd party or homemade router tables? I can't find much on how it actually attaches.

Thanks

KLW

Views: 223

Reply to This

Replies to This Discussion

Thanks Robert

Sounds about like I thought, the fence set up itself looks pretty slick, a bit expensive but I have and Incra Miter gauge for my table saw and once you set it all up it's really accurate!

I'll be building some type of knock down router table to go with this (design to be finalized ;-) since I have limited shop space...

Thanks

KLW



Robert Melrose said:
You can clamp it or screw it to the table. To be used in it's full capacity your table should be deeper in the back to allow more fence travel. When setting it up just make it parallel with your miter slot and zero the fence to the center of the router bit and you will be good to go. Hope this helps.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_