This tool works great with kreg jig. Two things it does well with kreg jig you can drive screws faster in tight spots much like using the small ratchet which some have suggested. I just started using with my battery drill with clutch set to low setting when using on 3/4 stock and final tightening with this driver. This a ball handle screw driver mine was called a screwball driver. Some of you may have had them this was the most powerful hand driver I ever owned.
It is rugged built amazing driver talk about torq this is it. I searched the web and found what looks similar could be even improved. I don't know if it is same quality. I am afraid it was not taken seriously when came out because its name. I believe it was manufactured by Crescent. There is a video in web page.
http://www.qvc.com/qvc.product.V31446.html?item=V31446&ref=GAS&...
Tags:
This is the best hand screwdriver I have owned. I was having trouble removing some old shelf brackets in my shed my power drivers was mangling the heads. Not this screwdriver they came out with ease . I had wasted 1/2 hr previously and made no headway in about 5 minutes I had removed all the brackets. This as real high tork no slipping.
I had a ''ball top'' style, (don't recall the brand), many years ago---
the racheting mechanism failed in a short while.
I've invested in several styles of racheting drivers, over the years---
some good---some okay.
Some styles are handy for specifice uses.
Many styles are offered on todays market.
Some styles offer advantages over others.
I like my old Stanley the best.
It's a straight handle, with 3 deep grooved features that provide a firm grip.
Comfortable to hold---min stress on the hand.
The ratchet mechanism is strong.
Additonal info:
When selecting screwdriver bits, the "bit tip" should fit snug, for max effectiveness.
i read your discription and it discribes one i got from my dad when he passed it`s well used & still works great i don`t use it often because it was dad`s have a great day
I ordered the 3 drivers in the video should be here monday in my mail box. I wanted a spare and my neighbor wanted 1 . Since I came across this driver I have been using it on 3/4 material so I don't over tighten screws.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service