Kreg Owners' Community

First time I really had a need for the ACS miter guide.

I've been using my Adaptive Cutting System table for a few years now, and it's been really solid. This past week was the first time I ever needed to use the miter guide though.

I was rebuilding some shelving in a tiny closet and I discovered the walls weren't even close to parallel. To make matters worse, the last three inches of both side walls made a bend inward. After thinking about the problem for a bit, I remembered the miter guide and after a few minutes, I had a jig all locked up that allowed me to quickly cut all of the crooked trapezoid shaped shelves "perfectly." A few minutes later I had it reconfigured to knock off the back corners to accommodate the bend in the drywall.

What would have taken me quite a bit of time to build a cardboard template was knocked out in about ten minutes total for all of the shelves. I continue to be extremely happy with the table and all of the flexibility that it brings to my projects.

Views: 134

Attachments:

Reply to This

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

4" Dust Port for Kreg router table fence?

Finally installed a 4" dust collection system in my shop. I'd like to find a 4" collection port for my Kreg router table (PRS1045) fence. Anybody know where I can find such an animal or one that can be modified to fit?Thanks!Continue

Tags: port, collection, dust, fence, Router

Started by E M Hampton in Other Kreg® Products Dec 2.

Kreg Circular Saw Track Guide Question

Hi all....Has anyone have experience using a Kreg circular saw track guide system for ripping long boards??? The boards would be 5 to 6 inches wide by 6 feet, I have a Bosch 4100 portable table saw. But ripping boards that length with a 45% angle…Continue

Started by Ed Anderson in Other Kreg® Products Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_