Which is the best way to apply finsihes? Brush or Spray?
I applied the stain and am working on applying my clear coat. I have been using a brush with water based polyurethane, thin coats and sanding and steel wool in between coats. This seems fine but notice some brush marks. Thought that spraying might be better but did not know if there is other problems associated with that.
Any input would be helpful.
Thanks Bill
Tags:
I totally agree with Kim C ... NEVER use steel wool with anything water based. If you don't really want to spray, have you tried one of those sponge brushes? Another option, try using wipe-on poly - it's a bit thinner. I've also used Jeffery Pike's method of using 400 grit. I've even gone so far as to use 800 grit with excellent results. I really should get a sprayer - but need so many other things first.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
The Clamp anchor screw broke on my mobile project center. How can I acquire a replacement?Continue
Started by Jon J Howard in Beginners' Zone 11 hours ago.
Just got a rip-cut and installed my Bosch saw haven't used it yet but saw was a good fit. Got the original ripcut and didn't really like it had trouble cutting straight. New one has several improvements should make it work much better. especially…Continue
Started by William Burt Brown in General Woodworking Mar 17.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments
© 2021 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service