Kreg Owners' Community

Anyone interested in the chest plans feel free to contact me. I have a local place I get my lumber from that's very reasonable so the prices may fluctuate based on that, but it takes roughly 16 board feet to make minus the top. If a solid top it takes roughly 20 board feet. The ones I made out of oak I used a 3/4 in ply topped wrapped in solid oak banding that worked out with a 3/8 roundover. You can use rail and stiles for the panels or for flat panels I use 1/4 in. ply and a slotting bit on my router. The chest measures 22x42x18. A chest out of oak generally runs about $150 and cherry $175, I have made 3 this year, one as a hope chest for my 18 year old daughter and 2 for friends for their wives for Christmas. Rockler has brass plates that I have put on them with the names and Christmas 2009. Here's a material list to start:
16 to 20 bd ft lumber
2 boxes of tongue and groove cedar lining (takes almost the whole 30 sq ft.)
1 30 in. piano hinge
1 lid support
2 2x4 1/4 in. oak ply (if cherry, i used rockler for cherry veneer packs $15)
1 2x4 3/8 in MDF (for bottom)
KREG JIG and screws!!!

Views: 4674

Attachments:

Reply to This

Replies to This Discussion

Nice looking chest!!
Thanks!!! They are really quite easy!!

Aaron Hooks said:
Nice looking chest!!
I like easy! Could you send me your plans?

justin waldron said:
Thanks!!! They are really quite easy!!

Aaron Hooks said:
Nice looking chest!!
Will do!! Want to send your email address to me?
Here you go - aaron.hooks@abtekllc.com

Thanks again

justin waldron said:
Will do!! Want to send your email address to me?
Very nice piece. My daughter would love one. How much are the plans?
Bob Shepard hscrewdude@comcast.net
Very nice. Would love to have it.
Want to send me your email address and I will forward what I have drawn up so far?

Bob Willis said:
Very nice. Would love to have it.
bwillis@comporium.net
Yes please send me the plans also. vinylconcepts@hotmail.com

Looks great ...Good work Robert
Wow Robert! That is beautiful. Please send me the plan when you get a moment at Tom.Pynaker@gmail.com. Thank you in advance!
Good looking chest. May I have the plans josteen@netcommander.com

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Replacing existing slides but cannot remove drawer front

The Kreg slides are made to work with new drawers before putting on the drawer front. In my situation, I cannot remove the existing fronts which means when reversing the jig to hold the draw, it’s at an angle. Not sure what I should do to make them…Continue

Started by Jay Homeyer in General Woodworking Apr 25.

Parts

The Clamp anchor screw broke on my mobile project center.  How can I acquire a replacement?Continue

Started by Jon J Howard in Beginners' Zone Apr 20.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_