Kreg Owners' Community

Hi everyone,

     I'm buying another box of screws for my project and found these two listed on amazon.

 

http://www.amazon.com/Kreg-SML-C125-4-Inch-Coarse-1000-Pack/dp/B000...

 

http://www.amazon.com/gp/product/B0002QZ4XK/ref=oss_product

 

Both have #2 square drive heads, but one is titled #8 course, and the other is titled #2 course.

 

 

Are there actually 2 different diameter screws available on the 1 1/4" course, or is this just Amazon screwing up their product titles? 

 

The detailed description on the 1000 pack says the screws are #8, so I'm kinda thinking the data entry guy @ Amazon just read the #2 for the square bit size on the product picture and called it a #2 screw.

 

 

Thanks!

John

 

Views: 436

Reply to This

Replies to This Discussion

John,

This is a description error on Amanzon's site. Both of the screws that you are referring to will be a #8 screw with a #2 square drive. We are in the process of getting this resolved. Thank you for bringing this to everyone's attention.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_