I have a question about the kick board for the 15-inch cabinet.
The plans call for a 4-1/2-inch cut out, but only a 4-inch kick board.
That leaves a half inch gap there. Typo?
Plus the cabinet floor uses a spacer of 5 inches to set the floor height.
The cut out is 4-1/2", the kick board is 4"...it doesn't add up.
Thoughts??
Alan
Tags:
Hi Alan,
Can you please link to the project plan you are referencing? This will help us, as well as other Community members, to best assist you.
Thanks!
KregRep
This would be the basic cabinetmaking DVD by Mark Duginske, building a 15-inch base cabinet. I downloaded it from your site. Specifically the cut list on page 21 and page 19.
Thanks, Alan. I will communicate this information to the Kreg Customer Service Team and be back with an answer shortly.
KregRep
Hi Alan. This plan is from the Cabinetmaking Booklet that comes free with the purchase of our jigs. There is a typo. The kick board should be 4 1/2" to cover that space. However, the cabinet floor is supposed to be at the 5" mark, as stated in the booklet. If you need additional assistance, please reach out to Kreg Customer Service by calling 800-447-8638 or by emailing customerservice@kregtool.com.
Thanks,
KregRep
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service