15-inch base cabinet plans

[Alan]

I have a question about the kick board for the 15-inch cabinet.
The plans call for a 4-1/2-inch cut out, but only a 4-inch kick board.
That leaves a half inch gap there. Typo?
Plus the cabinet floor uses a spacer of 5 inches to set the floor height.
The cut out is 4-1/2", the kick board is 4"...it doesn't add up.
Thoughts??
Alan

[KregRep]

Hi Alan,
Can you please link to the project plan you are referencing? This will help us, as well as other Community members, to best assist you.  
Thanks!
KregRep

[Alan]

This would be the basic cabinetmaking DVD by Mark Duginske, building a 15-inch base cabinet. I downloaded it from your site. Specifically the cut list on page 21 and page 19.

[KregRep]

Thanks, Alan. I will communicate this information to the Kreg Customer Service Team and be back with an answer shortly. 
KregRep

[KregRep]

Hi Alan. This plan is from the Cabinetmaking Booklet that comes free with the purchase of our jigs. There is a typo. The kick board should be 4 1/2" to cover that space. However, the cabinet floor is supposed to be at the 5" mark, as stated in the booklet. If you need additional assistance, please reach out to Kreg Customer Service by calling 800-447-8638 or by emailing [e-mail].

Thanks,
KregRep