View
Discussions Replied To (4) | Replies | Latest Activity |
---|---|---|
"thanks for all the answers ,i appreciate it "James Pittman Jr. replied Dec 8, 2011 to Depth Collar Slipping |
9 |
Dec 8, 2011 Reply by James Pittman Jr. |
"That is what i have decided to do to mine "James Pittman Jr. replied Dec 8, 2011 to Depth Collar Slipping |
9 |
Dec 8, 2011 Reply by James Pittman Jr. |
"ok i appreciate it did not think about the allen set screw being what you were talki…"James Pittman Jr. replied Dec 7, 2011 to Depth Collar Slipping |
9 |
Dec 8, 2011 Reply by James Pittman Jr. |
"it is not the drill chuck that slips it is the depth guage collar. also i am not fam…"James Pittman Jr. replied Dec 5, 2011 to Depth Collar Slipping |
9 |
Dec 8, 2011 Reply by James Pittman Jr. |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service