Ken Darga's Discussions (2,128)

View

Discussions Replied To (2107)	Replies	Latest Activity
"Tom, If you're going with two layers of 1/2" MDF, I'd add 2x4 stock to the underside…" Ken Darga replied Apr 26, 2017 to Router table	3	Apr 26, 2017 Reply by Ken Darga
"Chuck, an noted under "Need Help?" Technical Support is always happy to help via pho…" Ken Darga replied Apr 21, 2017 to Project clamp	2	Apr 21, 2017 Reply by Chuck Webster
"Tom, You can make a simple router table, made from MDF--- 24" x 36"x3/4" stock, 2 la…" Ken Darga replied Apr 21, 2017 to Router table	3	Apr 26, 2017 Reply by Ken Darga
"Jeff, Spine joinery may be the way to go, if you're going to store and tote rocks in…" Ken Darga replied Apr 20, 2017 to Looking to build a wood box with mitered joints (Kreg Jig 4)	7	Apr 20, 2017 Reply by Ken Darga
"Doug, I've had cracking happen to me, near the ends, in hard and soft wood, when the…" Ken Darga replied Apr 19, 2017 to wood splits	4	Apr 19, 2017 Reply by Jay Boutwell
"Jeff, With mitered corners, I use biscuit joinery--- no exposed screws. This gives i…" Ken Darga replied Apr 18, 2017 to Looking to build a wood box with mitered joints (Kreg Jig 4)	7	Apr 20, 2017 Reply by Ken Darga
"Prior to using a small round over bit, I'd use a block plane. Make shallow cut pass…" Ken Darga replied Apr 11, 2017 to Kitchen Cabinet Face Frames	3	Apr 12, 2017 Reply by Jay Boutwell
"Bill, 2x lumber normally features a rounded edge. The purpose for the rounded edge,…" Ken Darga replied Apr 9, 2017 to Which do I want, a jointer or planer?	6	Apr 11, 2017 Reply by michael evans
"Bill, I use a router to dress the edges. Much easier and get great results." Ken Darga replied Apr 6, 2017 to Which do I want, a jointer or planer?	6	Apr 11, 2017 Reply by michael evans
"I don't feel you achieve a solid connection, driving the screw into MDF. A stronger…" Ken Darga replied Apr 4, 2017 to Correct Screw	4	Apr 6, 2017 Reply by Scott Brubaker

‹ Previous
1
…
5
6
7
8
9
…
211
Next ›

RSS

Welcome to
Kreg Owners' Community

Sign Up
or Sign In

Or sign in with:

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.

Videos

Miter Saw Workbench

Added by Mike Criss

The Ottoman with Secret

Added by Alex DrMaster

How to Build a Shaker Fireplace Surround - Woodworking

Added by Philip Miller

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

1	New Members: Please Introduce Yourself!
2	Kreg KMS7102 Table Saw Precision Miter Gauge System and the DeWalt 745 Table Saw
3	Bench
4	Bench1

Ken Darga's Discussions (2,128)

"Tom, If you're going with two layers of 1/2" MDF, I'd add 2x4 stock to the underside…"

"Chuck, an noted under "Need Help?" Technical Support is always happy to help via pho…"

"Tom, You can make a simple router table, made from MDF--- 24" x 36"x3/4" stock, 2 la…"

"Jeff, Spine joinery may be the way to go, if you're going to store and tote rocks in…"

"Doug, I've had cracking happen to me, near the ends, in hard and soft wood, when the…"

"Jeff, With mitered corners, I use biscuit joinery--- no exposed screws. This gives i…"

"Prior to using a small round over bit, I'd use a block plane. Make shallow cut pass…"

"Bill, 2x lumber normally features a rounded edge. The purpose for the rounded edge,…"

"Bill, I use a router to dress the edges. Much easier and get great results."

"I don't feel you achieve a solid connection, driving the screw into MDF. A stronger…"

Need Help?

Popular Posts & Projects

Videos

Forum

Product Reviews