Kreg Owners' Community

KregCS's Discussions (174)

Search Forum

View

Discussions Replied To (174) Replies Latest Activity

"Jim,  I would not recommend using coarse threaded screws in hard wood material as t…"

KregCS replied Sep 9, 2016 to course vs fine screws

 2 Sep 9, 2016
Reply by KregCS

"Frank,  Unfortunately it appears that your router only has a certain amount of adjus…"

KregCS replied Sep 8, 2016 to Router Table Question for Bosch Router

 2 Sep 10, 2016
Reply by Tim Grace

"Wilbert,  There are a couple things that could be going on in this situation. First…"

KregCS replied Sep 7, 2016 to junior kreg 3

 2 Sep 7, 2016
Reply by KregCS

"Bonnie,  It sounds as if moisture is your issue with the plugs. Due to the differen…"

KregCS replied Aug 31, 2016 to Wooden Plugs not fitting properly

 5 Sep 10, 2016
Reply by Ken Darga

"Jack,  In this application, there would not be a huge difference in the strength of…"

KregCS replied Aug 23, 2016 to Strength determined by screw direction?

 3 Aug 29, 2016
Reply by Carlos

"Dale,  Do you by chance have a picture of the holes you are referring to?"

KregCS replied Aug 1, 2016 to pocket holes in 1/2 plywood

 3 Aug 1, 2016
Reply by KregCS

"Dale,  When you say that they look bad what are you referring to? If you could let m…"

KregCS replied Jul 27, 2016 to pocket holes in 1/2 plywood

 3 Aug 1, 2016
Reply by KregCS

"Nick,  When you are working with thicker hardwoods like this, it does make it a litt…"

KregCS replied Jul 26, 2016 to Question about pocket hole screws in oak

 3 Jul 27, 2016
Reply by Chris McNamara

"Frank,  The general rule of thumb when working with two different thicknesses is to…"

KregCS replied Jul 11, 2016 to Size of screw

 7 Jul 13, 2016
Reply by Stewart Wardlow

"Bill,  When using pocket holes laterally on a 2x4, you would need to have one on bot…"

KregCS replied Jun 28, 2016 to Using the HD kit for lateral holes in 2x4's

 4 Jun 28, 2016
Reply by Bill Lanterman

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 

1 New Members: Please Introduce Yourself!

New Members: Please Introduce Yourself!
2 Kreg KMS7102 Table Saw Precision Miter Gauge System and the DeWalt 745 Table Saw

Kreg KMS7102 Table Saw Precision Miter Gauge System and the DeWalt 745 Table Saw
3 Bench

Bench
4 Bench1

Bench1

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

Sign in to chat!
_