Kreg Owners' Community

Shift's Discussions (46)

Discussions Replied To (41) Replies Latest Activity

"@Rick ... good to hear .... it's shocking to think that the 1 1/4" of screw that's a…"

Shift replied Jun 24, 2012 to Attaching apron to legs - pocket holes or steel braces?

9 Jun 24, 2012
Reply by Shift

"Thanks Rick .....  Did you use 2 1/2" screws to attach the legs to the apron or lon…"

Shift replied Jun 24, 2012 to Attaching apron to legs - pocket holes or steel braces?

9 Jun 24, 2012
Reply by Shift

"Great info ... thanks Ken. Table is 38 1/2" wide, 29" high. I'm stuck with 2x4's fo…"

Shift replied Jun 21, 2012 to Attaching apron to legs - pocket holes or steel braces?

9 Jun 24, 2012
Reply by Shift

"@David That's not my table  ... really wish it was ....but it's just a pic i pulled…"

Shift replied Jun 21, 2012 to Need some advice on how to back out screws to allow for movement of table top

49 Jul 30, 2012
Reply by Ken Darga

"@Jeff..... as I mentioned earlier, I'm still at a stage in building right now where…"

Shift replied Jun 21, 2012 to Need some advice on how to back out screws to allow for movement of table top

49 Jul 30, 2012
Reply by Ken Darga

"That's not my table .... just a photo i found on the web that i've used as a referen…"

Shift replied Jun 21, 2012 to Need some advice on how to back out screws to allow for movement of table top

49 Jul 30, 2012
Reply by Ken Darga

"Thanks Rick ... makes sense. I guess my table is going to be the test ...  :) that…"

Shift replied Jun 21, 2012 to Need some advice on how to back out screws to allow for movement of table top

49 Jul 30, 2012
Reply by Ken Darga

"Two last questions ... If kreg screws create such a strong joint, then why don't th…"

Shift replied Jun 20, 2012 to Need some advice on how to back out screws to allow for movement of table top

49 Jul 30, 2012
Reply by Ken Darga

"No glue anywhere. How do floor boards behave? (btw ... really appreciated you takin…"

Shift replied Jun 20, 2012 to Need some advice on how to back out screws to allow for movement of table top

49 Jul 30, 2012
Reply by Ken Darga

"No ... the breadboards were only attached with screws. But ... and this is a big, bi…"

Shift replied Jun 20, 2012 to Need some advice on how to back out screws to allow for movement of table top

49 Jul 30, 2012
Reply by Ken Darga

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Rip-cut ACS plunge saw

Just got a rip-cut and installed my Bosch saw haven't used it yet but saw was a good fit. Got the original ripcut and didn't really like it had trouble cutting straight. New one has several improvements should make it work much better. especially…Continue

Started by William Burt Brown in General Woodworking Mar 17.

Is the screw driver impact drill rater?

Is the screw driver impact drill rated?Continue

Started by Bob Naylor in Beginners' Zone Mar 10.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_