Kreg Jig® Purchasing (170)
| Discussions | Replies | Latest Activity |
|---|---|---|
Missing partsI was at my local Lowes looking at a bunch of things and decided to give the Kreg Rip-Cut a shot. As I laid out all the parts I discovered… Started by Ryan McAllister |
1 |
Mar 27, 2013 Reply by Derek Gould |
This is a GREAT source for Kreg products!!!Hey all. I just wanted to share a great source for Kreg products. The company is called A&H Turf and they are here in my home town of… Started by David Niebeling |
1 |
Feb 22, 2013 Reply by Bob DeMay |
Why is the HD drill guide not steel like the other jigs?Hi, Why does the HD not have the same steel drill guide design as the standard and micro jigs? The drill bushings are still steel but it do… Started by T Ferguson |
2 |
Dec 31, 2012 Reply by Ken Darga |
Rockler offerhttp://www.rockler.com/product.cfm?page=31791&utm_source=NL&utm_medium=email&utm_campaign=V2246 Rockler has the toolboxx kit… Started by John Schaben |
3 |
Nov 30, 2012 Reply by James P. Cottingham |
Sheet Goods Software HelpHi everyone,I am trying to find layout software for managing sheet goods to make the most of my material.I would appreciate any input from… Started by Jim Delorme |
14 |
Nov 23, 2012 Reply by James Waller |
Kreg Jig HD not at lowes yet?I thought this was going to be out last month, but I haven't seen it online at lowes.com or in the local store. Anybody have one yet? Started by Jason Watkins |
10 |
Oct 8, 2012 Reply by Lamont |
Alder - Course or Fine Thread Screws???I am in the process of joining two pieces of Alder together. Should I use course or fine thread pocket hole screws? Thanks. Started by Stanley C. Pearse |
9 |
Oct 2, 2012 Reply by Rick |
HD jig screwsThe Kreg web site leads me to believe that while the new HD jig is available, it only comes with 5 screws, and additional screws are not cu… Started by tom vanbrunt |
10 |
Sep 24, 2012 Reply by Ken Darga |
looong coarse thread pan head screwsI can't find any pan head screws longer than 1½". I'm in the middle of a project but could use some 2½", 2" at least:( Is SPAX a good subst… Started by John Schaben |
21 |
Sep 6, 2012 Reply by Troy |
Peachtree offerhttp://www.ptreeusa.com/edirect_081712.htm Started by John Schaben |
4 |
Aug 26, 2012 Reply by James P. Cottingham |
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
