Kreg Jig® Projects (333)
| Discussions | Replies | Latest Activity |
|---|---|---|
Need help with building storm window framesI can build the basic two-pane frame from simple 1x2 pine and fasten the pieces together with pocket hole joints. What I need is the corre… Started by Jim O |
5 |
Dec 30, 2015 Reply by Elizabeth Leveques |
tip out garbage cabinatlooking for plans for a tipout cabinat Started by jay engdahl |
7 |
Dec 30, 2015 Reply by Elizabeth Leveques |
miter saw stationI put this together using the Kreg Top Trak kit. Whats showing is a 6 ft section. I have another 2 ft section under way. Of course everyt… Started by Steven Lee |
7 |
Dec 30, 2015 Reply by Elizabeth Leveques |
Kreg Jig used in my new speaker systemI bought my K4 about 6 months ago now, and up until about 1 month ago I had only used it to make wooden frames to stretch canvas art across… Started by Ben Socratous |
10 |
Dec 30, 2015 Reply by Elizabeth Leveques |
Hand rail to wallThe hand rail at my house came loose at the wall. I was thinking to put a screw in it from the bottom with the single Kreg jig. My question… Started by Brian Williams |
1 |
Dec 30, 2015 Reply by Elizabeth Leveques |
My Kreg Jig experience and projects.I recently posted a video on YouTube about a jig I made for, and using, the Kreg Jig Junior. Somebody from here stumbled on it, and invite… Started by Milky |
7 |
Dec 30, 2015 Reply by Elizabeth Leveques |
Exterior board and batten shutters.Due to storm damage we had a new charcoal colored roof put on our 32 year old house, that inspired my wife to say something bold, like… Started by Don Harris |
3 |
Dec 30, 2015 Reply by Elizabeth Leveques |
A Successful Weekend & a Half projectJust finished a bookshelf for my wife. Great project that I completed pretty quickly. Last bookshelf I built took 2 or 3 weekends and sat i… Started by gdatomic |
3 |
Dec 30, 2015 Reply by Elizabeth Leveques |
Any guesses?Anyone care to take a guess at what I'm building now? (And no, you can't just say a box with two holes in it. lol) Started by Don Grubish |
21 |
Dec 30, 2015 Reply by Elizabeth Leveques |
MDF vs Plywood for garage workbenchHi to all: This weekend I will be tackling a workbench project, which is my first project. I have a couple of questions concerning the pro… Started by Daniel Pinsky |
15 |
Dec 30, 2015 Reply by Elizabeth Leveques |
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
