Beginners' Zone (1,312)
| Discussions | Replies | Latest Activity |
|---|---|---|
Car Toolbox QuestionsHello. For my first kreg jig project, I'm building a toolbox to carry around in the car trunk. Attached are a badly done drawing in paint… Started by Matthew Hinton |
3 |
Jul 30, 2014 Reply by Matthew Hinton |
Choosing Project LumberMight be a silly question, but preparing to start the largest project I have attempted yet. I will be using Oak plywood and solid Oak and… Started by Rita B. |
6 |
Jul 29, 2014 Reply by Rita B. |
new to forummorning folks. Im Scott and im new to the forum. I guess you can just call me a hobbyist but i really enjoy working with wood and building… Started by scott haydu |
3 |
Jul 28, 2014 Reply by scott haydu |
screw sizeI'm doing a cabinet job and I'm using 1/2 birch plywood and I bought screws for that thickness but they don't seem to work right. Any ideas… Started by Bradley Rogers |
4 |
Jul 28, 2014 Reply by Bradley Rogers |
Adding pictures to projects.So maybe I am crazy but I am trying to add a couple pictures of a project I just completed but when I drag and drop the whole screen become… Started by Robert Williams |
3 |
Jul 25, 2014 Reply by james wilhelm |
A New (to me) use for the Kreg Jig....Part 1Been a Kreg forum member for several months, but this is my first post... so, Howdy! I'm in Western NY (near Buffalo) and am a novice wood… Started by Paul Mundy |
1 |
Jul 17, 2014 Reply by michael evans |
A New (to me) use for the Kreg Jig....Part 3During the repairs (after chair # 5 was done), I realized that the tip of the Kreg drill had broken off. Anyone else ever have this happe… Started by Paul Mundy |
1 |
Jul 16, 2014 Reply by KregCS |
A New (to me) use for the Kreg Jig....Part 2Here are some more photos of the process... Started by Paul Mundy |
0 | Jul 16, 2014 |
Spammers On This SiteI do not like to become vocal in this tone of attitude however this site is becoming another site of which "spammers" seem to like to pick… Started by Jay Boutwell |
13 |
Jul 15, 2014 Reply by Ken Darga |
Stain before assembly?I have a really complex shelf unit that I've designed. I once had a Kreg rep recommend that I stain before assembly to avoid inconsistent f… Started by Don Cue |
3 |
Jul 14, 2014 Reply by Don Cue |
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
