Beginners' Zone (1,312)
| Discussions | Replies | Latest Activity |
|---|---|---|
Someone teach me about Face Frames & DoorsGreetings Kreg Family, I need a lesson on face frames and the doors that attach to them. I am a visual person and I've been reading things… Started by Cheryl Coleman |
12 |
Sep 12, 2014 Reply by Jay Boutwell |
HelpI am fairly new to Kreg Jigs. I was making something using 2x material. I set my jig for 1-1/2" to use 2-1/2" screws. I didn't set my ji… Started by Joanne Caron |
6 |
Sep 10, 2014 Reply by Scott G |
Kreg Precision Trak and Bosch GCM 12SDI have a Bosch GCM 12SD mounted on a Bosch T4B miter saw stand. I would like to get a Kreg Precision Trak & Stop System. My problem is… Started by Allan Brockman |
0 | Sep 8, 2014 |
Mounting Floating Shelf to WallI have a large television mounted on the wall with all connects hidden behind it. I would like to put a shelf right above the television. … Started by Allan Lackas |
1 |
Sep 4, 2014 Reply by Jay Boutwell |
DIY Project Kit (Plans)I already have all of the items in the DIY Project Kit, but would love to have the plans for the Entryway Organizer. Does anyone have a co… Started by Rene' Martinez |
0 | Sep 4, 2014 |
45-Degree Picture FrameCan the Kreg K4 System be used for picture frames with ends cut at 45 degrees? Started by jim bray |
2 |
Sep 4, 2014 Reply by KregRep |
Joining BoardsHello all. Needing some guidance. I am doing a backsplash, and am joining 2 boards cut at 45 degrees. How can I use my jig to join these bo… Started by J. Pree |
23 |
Sep 3, 2014 Reply by J. Pree |
New MemberHi everyone, I just noticed that Kreg recommends introducing yourself as a new member, so here goes. My name is Bryan and I'm from the… Started by Bryan Hurley |
6 |
Sep 2, 2014 Reply by Bryan Hurley |
Preference on Sanders?I have two sanders. One quarter sheet Dewalt palm sander and the other is a Craftsman orbital. Using both today and notice so much vibr… Started by Rita B. |
16 |
Sep 2, 2014 Reply by James P. Cottingham |
Lumber CartCan anyone help me out on some ideas I could use on making a rolling lumber cart. There are so many different ones, that I want to use i… Started by Leslee |
5 |
Aug 31, 2014 Reply by michael evans |
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
