Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Holes for shelfI am putting some bead board about 2/3 up the wall and want to top it with a 1x4 shelf. The wall are just about 5 foot long in an L. They w… Started by Michael B |
1 |
May 26, 2017 Reply by Glen S |
screws not tighteningThe last couple of times I used my k-4 jig, the pocket hole screws did not grip the wood enough to get a tight fit. It has happened more th… Started by tim zuba |
3 |
May 22, 2017 Reply by Glen S |
UK Deck Screw StockistsCan anyone suggest a UK stockist of Kreg Deck Screws? (with stock!) I purchased the Deck Jig and 200x additional screws, but my local stock… Started by Matt W |
6 |
May 12, 2017 Reply by michael evans |
Kreg Jig Hole Plug Cutter SystemHello All, Was thinking about purchasing the Pocket Hole plug Cutter system from KREG, but i'm currently only using the HD screws. The ki… Started by Caleb Sanz |
2 |
May 11, 2017 Reply by Ken Darga |
How durable are Protec-kote screws?I want to make a deck out of Massaranduba hardwood which will last for at least 25 years. Are the Protec-kote screws for the Deck jig durab… Started by Jasper Bouwmeester |
1 |
May 3, 2017 Reply by KregCS |
Kreg Hinge JigHi everyone, Has anyone used the Kreg HInge JIg to bore holes for 40mm cups? Kreg customer service / technical support does not recommend… Started by Mike Wegryn |
0 | May 2, 2017 |
Beginner-ish question about table legsHello everyone, I'm new to the site here and based on needed to use pocket holes. I am not the best with lingo so bear with me. I starte… Started by Pat |
3 |
Apr 30, 2017 Reply by R. E. Woods |
Ideas to help hold 2x4 (and thicker) stock when joiningI'm very new here, so I'm open to any suggestions. I've been happily working with the Kreg jig for a little while, and recently added the… Started by Charlene Christensen |
6 |
Apr 26, 2017 Reply by Charlene Christensen |
yet another jig/drill setting question for different thickness woodsI'm making a lumber cart and I need to drill holes in a 3/4 piece of vertical plywood that will then be used to attach a "lid" of 1/2 inch… Started by Todd Guill |
1 |
Apr 26, 2017 Reply by KregCS |
Router tableHello Members! I am new Here I live in Thailand I am American living here, Just bought a K5 jig and other accessory's I want to build kitc… Started by THomas j Fulnecky |
3 |
Apr 26, 2017 Reply by Ken Darga |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service