Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Proper spacing of pocket holes for heavy duty drawersWe are building a significant storage cabinet in our wood working shop. It has 66 drawers. They range from 3", 5", 8", 9", and 11" heig… Started by Donna Osburn |
3 |
Aug 24, 2017 Reply by Donna Osburn |
Kreg Customer ServiceHad to send a big thank you go Kreg for going above and beyond for a problem I had with the mobile project center. They resolved beyond my… Started by Brian Cooper |
1 |
Aug 19, 2017 Reply by Tim Grace |
How do I fix my Kreg clamps?I have 2 Kreg clamps that were screwed out to adjust for a joint. Now they won't go back in and clamp. Is there a way to fix them? Started by Candace Sorensen |
2 |
Aug 18, 2017 Reply by KregRep |
Potting bench plansHi all, I'm planning my first project, the potting bench and my wife is short. I want to make it a couple inches shorter and figu… Started by Thomas Everett |
2 |
Aug 14, 2017 Reply by Thomas Everett |
Corner Garden Tool Storeage RackHello Folks I would like to build a Garden Tool Storage rack for my shop to fit in a corner. I have a few thoughts but I was hoping to get… Started by Wayne Breaux |
5 |
Aug 7, 2017 Reply by Wayne Breaux |
What size screws to use in 1 inch materialI am using 1 inch deck boards and I are going to edge join them. What length screws should be used? My literature covers 1/2, 3/4, and 1 1/… Started by Steve Howe |
5 |
Jul 25, 2017 Reply by Steve Howe |
working with Kreg Jig R 3 for first timeHello everyone. I am new to Kreg jigs and in the process of building a very big Project. But my question is I hoe not so hard to get explai… Started by Nathaniel Todd Carnine |
1 |
Jul 25, 2017 Reply by Ken Darga |
Track GuidesDoes any of the kregg guides fit a Worx wx427 xl 7107w Started by Toby53 |
1 |
Jul 14, 2017 Reply by KregCS |
does anybody Router table insert PRS4036 will work with Bosch MRF23EVS?Started by Mike McCarthy |
2 |
Jul 13, 2017 Reply by KregCS |
Forstner bitsWho makes the best, long lasting bits that will not cost me an arm and a leg? Or is this just one of those things you get to replace more o… Started by Stephanie H |
5 |
Jul 13, 2017 Reply by Ken Darga |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service