During the repairs (after chair # 5 was done), I realized that the tip of the Kreg drill had broken off. Anyone else ever have this happen?? The only other time I'd used the drill and jig was to put the chair-leg jig together.
The folks at the Rockler store in Buffalo were kind enough to mail me a new drill, but that took two days via USPS First Class and just under $20. Oh, well - - -the cost of volunteer work, I guess. :o(
But another issue occurred. I noticed that the Kreg jig was getting pretty warm. In fact, the metal part was too hot to touch. This was as I was doing the drilling for chair #6. It was taking me about 15 minutes per chair, so I don't think I was overdoing things...just taking my time.
The attached pics show that the plastic was beginning to melt and one of the "barrels" unseated and started to pull out of the Kreg jig body. And the drill wouldn't go all the way into that barrel. After everything cooled down to room temp, (I assume the contraction of the metal diminished), the drill would go into the barrel all the way to the stop collar. I was again able to use the jig for one more chair.
At this point I'm wondering about the quality of the Kreg components... Does it seem to you I was overusing the Kreg jig? Have any of you experienced either of these failures? Your thoughts will be appreciated.
Thanks,
Paul
Tags:
Paul,
First off, I'm sorry to hear that you have had some issues with our jig. The problem you are seeing is definitely not normal. I would like to discuss this with you in more detail to get some additional information and get this resolved for you as quickly as possible. If you could send me a personal message with your contact information, I will get in touch with you as soon as possible.
Thanks!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service