You are very welcome , I will help you when I can , if I know the right answer , done a certain project , used a certain tool that is asked about in a post !!! Keep up the good work , enjoy your wood working and have fun , that is what it is all about, Have a great day , JIM !!
Stephanie , did not want to start an arguement , I just asked a question about the counter sink bit,s , as they were not related to the post and did not want you to be misled !!! I think all of your project,s are very nice and you have learned a lot and will do very good in wood working !!! I have been doing this for 25 + years and you have a good future in wood working , keep up the good work and have a nice day , JIM !!!
Hi Stephanie, I agree with the chat thing however sometimes some need to understand when they start writing answers to anyone trying to learn. I can honestly tell you that I only write from my experience and that is a whole lot of years of building professionally. I recall too many times when I have see articles written to some that are not correct in procedure and many are Google obtained information coming from some who are telling you how to do something yet have little and or no experience. A pet peeve of mine is when a big mass of information is dumped on someone who is trying to learn. A good example was your experience with your table say and the massive amount of information that came in. I am glad to see you working at learning woodwork and taking on challenges that you are unfamiliar with. You will learn and you have the right attitude to go far in your journey in woodworking. Thank you for extending your friendship.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
Stephanie H's Comments
Comment Wall (4 comments)
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community
You're welcome, and thank you.
If I can be of help let me know
You are very welcome , I will help you when I can , if I know the right answer , done a certain project , used a certain tool that is asked about in a post !!! Keep up the good work , enjoy your wood working and have fun , that is what it is all about, Have a great day , JIM !!
Stephanie , did not want to start an arguement , I just asked a question about the counter sink bit,s , as they were not related to the post and did not want you to be misled !!! I think all of your project,s are very nice and you have learned a lot and will do very good in wood working !!! I have been doing this for 25 + years and you have a good future in wood working , keep up the good work and have a nice day , JIM !!!
Hi Stephanie, I agree with the chat thing however sometimes some need to understand when they start writing answers to anyone trying to learn. I can honestly tell you that I only write from my experience and that is a whole lot of years of building professionally. I recall too many times when I have see articles written to some that are not correct in procedure and many are Google obtained information coming from some who are telling you how to do something yet have little and or no experience. A pet peeve of mine is when a big mass of information is dumped on someone who is trying to learn. A good example was your experience with your table say and the massive amount of information that came in. I am glad to see you working at learning woodwork and taking on challenges that you are unfamiliar with. You will learn and you have the right attitude to go far in your journey in woodworking. Thank you for extending your friendship.
Welcome to
Kreg Owners' Community
Sign Up
or Sign In
Or sign in with:
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
New Members: Please Introduce Yourself!
Kreg KMS7102 Table Saw Precision Miter Gauge System and the DeWalt 745 Table Saw
Bench
Bench1
Videos
Miter Saw Workbench
Added by Mike Criss
The Ottoman with Secret
Added by Alex DrMaster
How to Build a Shaker Fireplace Surround - Woodworking
Added by Philip Miller
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service