Thanks for your interest. My table was basically copied from planes one developed and offered free plans from: Shanty-2-Chic.com I made my pedestal a little bit differently (2 X 6's) and the top is 2 x 4's. The feet are 2 x 6' stacked 2 high, like theirs. My attachment to the top was designed to be removable to make it easier to get through doors or for taking to someone else's house for a gift etc.
I hope this helps. If there is anything else, let me know
When Community members post photos and other content, they are simply showing off what they've created. They don't have to post plans, dimensions, etc. If you have questions about a member's posting, your best bet is to directly contact that person. You can do this in two ways: 1) Comment on their post. They may then see that your comment has been posted, depending on how they have their post set up. 2) Send them a message. To do that, look toward the top of the post where it says "posted by." Click on that, and it will take you to that member's page. There you'll see "Send a Message" along the left side. Click that, and you can send them a direct message. The next time they log on they will see your message in their inbox.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
Morgan Crawford's Comments
Comment Wall (2 comments)
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community
Morgan,
Thanks for your interest. My table was basically copied from planes one developed and offered free plans from: Shanty-2-Chic.com I made my pedestal a little bit differently (2 X 6's) and the top is 2 x 4's. The feet are 2 x 6' stacked 2 high, like theirs. My attachment to the top was designed to be removable to make it easier to get through doors or for taking to someone else's house for a gift etc.
I hope this helps. If there is anything else, let me know
When Community members post photos and other content, they are simply showing off what they've created. They don't have to post plans, dimensions, etc. If you have questions about a member's posting, your best bet is to directly contact that person.
You can do this in two ways:
1) Comment on their post. They may then see that your comment has been posted, depending on how they have their post set up.
2) Send them a message. To do that, look toward the top of the post where it says "posted by." Click on that, and it will take you to that member's page. There you'll see "Send a Message" along the left side. Click that, and you can send them a direct message. The next time they log on they will see your message in their inbox.
Welcome to
Kreg Owners' Community
Sign Up
or Sign In
Or sign in with:
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
New Members: Please Introduce Yourself!
Kreg KMS7102 Table Saw Precision Miter Gauge System and the DeWalt 745 Table Saw
Bench
Bench1
Videos
Miter Saw Workbench
Added by Mike Criss
The Ottoman with Secret
Added by Alex DrMaster
How to Build a Shaker Fireplace Surround - Woodworking
Added by Philip Miller
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service