Not sure if anyone has had this issue.
I have the Rip-Cut Ruler and I use it a lot to rip boards for cabinets.
Now the ruler's ink has been rubbing off with the sliding of the saw.
Has anyone else had this issue and if yes what was your solution to fix it besides buying another one.
Tags:
Are you leaving the weight of the saw on the rip-cut when you adjust it? I hold the saw off the work piece in one hand & move the guide with my other hand. That way the saw bed doesn't have weight bearing down on the ruler. I hope this helps.
I am not leaving the weight on the saw, otherwise, I would no longer have a guide lol.
I just use it a lot. From day one the numbers seemed somewhat light.
I am not leaving the weight on the saw.
Glen S said:
Are you leaving the weight of the saw on the rip-cut when you adjust it? I hold the saw off the work piece in one hand & move the guide with my other hand. That way the saw bed doesn't have weight bearing down on the ruler. I hope this helps.
Cynthia,
I'm sorry to hear that you are having this happen with your Rip-Cut. If you could reach out to our Customer Service team we would be more than happy to assist you with this issue.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service