Kreg Owners' Community

Big, small, full of tools, or just starting... post photos of your shop!  I'm sure there's quite a wide range of them out there.. I used to work in my attic, and now I'm in the garage.  Maybe the photos will give the rest of us ideas for tools, layout, lighting, etc. in our own shops!

Views: 1031

Reply to This

Replies to This Discussion

hi bob, i have some pics on my page, shop is not complete will post more pics as i go. my shop is 24x40 with a 8x40 patio out front. man door, 9x7 garage door, 10' ceilings, 200 amp electrical service, heat to come, cable, r19 walls and r45 ceiling. osb interior so i can screw anything anywhere. still working on finishing shop started  in May 2010, doing work myself. metal roof and siding. six 4'x6' windows one 2'x3' window, 40' of 24" deep bench and 4'x8' outfeed table. started out with a 9'x15' basement shop, then got a 24'x24' garage with the new house and got to build the 24'x40' shop. i dreamed of this shop for the last 12 years, had no room to build it. thank my wonder wife who let me build it, i am turly lucky and blessed! many many pics to come and no i dont drink my beer when working with power tools, only when planning and thinking dont want to loose a finger.


steve kidd said:
hi bob, i have some pics on my page, shop is not complete will post more pics as i go. my shop is 24x40 with a 8x40 patio out front. man door, 9x7 garage door, 10' ceilings, 200 amp electrical service, heat to come, cable, r19 walls and r45 ceiling. osb interior so i can screw anything anywhere. still working on finishing shop started  in May 2010, doing work myself. metal roof and siding. six 4'x6' windows one 2'x3' window, 40' of 24" deep bench and 4'x8' outfeed table. started out with a 9'x15' basement shop, then got a 24'x24' garage with the new house and got to build the 24'x40' shop. i dreamed of this shop for the last 12 years, had no room to build it. thank my wonder wife who let me build it, i am turly lucky and blessed! many many pics to come and no i dont drink my beer when working with power tools, only when planning and thinking dont want to loose a finger.
Attachments:

Hey Bob,

 

This is Nlrwilson I've posted several pics of my shop 

These are a little out dated.  I'll get some more in days to come.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_