Comment
Glenn - very impressive for sure. Ha - what a tease showing those long extrusions.
I see you have a lot of green in the background. I have a couple of the MPC's and have a track saw. I've been using 1x4 standoffs on top of them for breaking down sheet goods so I don't damage the MPC tops. Before I over think something have you come up with a cutting board solution for the MPC?
Thanks - Mike
An additional comment- I too would like to learn where I can buy two of the “T” channel connection pieces to connect my second workcenter (as soon as I can swing it).
Finally, I really feel for our southern neighbors in Aussie land and their plight in obtaining them! What gives?
I got mine last week. Impressive isn’t a strong enough term! I’m going to submit a side by side of my previous “workcenter” with my story as soon as I let myself take it downstairs to my shop. I love the thought that was put into its design(and at such a reasonable price). I have several of the “T” channel clamps and the K5 hole drilling clamp which I am excited to use with the workcenter. I should’ve bought two of them!
Chris Maher
Atlanta Ga
This is awesome! Can you tell me where you found the material for the side rails? It appears the clamps will work in those rails....
Thanks for sharing! Glad to hear, and see, that you're enjoying your new Mobile Project Centers!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community