Kreg Owners' Community

Mobile woodwork bench

My recently (almost 100%) finished mobile woodwork table with tools

  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Steven Baynes on January 18, 2018 at 11:03am

To be honest, the stuff is too expensive here in SA for a JET or Harbor freight dust collector, to us its 12 times the USD so I make all my own stuff!

Comment by Donnie Robinson on January 18, 2018 at 8:55am

Thanks 

Comment by Steven Baynes on January 18, 2018 at 8:30am

Hi Donnie, I built a leaf blower / vacuum motor into a box, the blower is in its own compartment (I forgot to take pictures when we made it) and the suction side has a small air box, all the pipes go into the small air box and the outlet of the blower goes into the inside of the big air filter, we do generator maintenance so I have access to my old stock for things like that. The filter stops the dust and we vacuum it all out every few weeks. The vac system is simple to clean and every few months we just take the lid off and give it a proper clean. The air filter by the way is for a big Komatsu generator set rated at 1 micron. Cheers, have fun!

Comment by Donnie Robinson on January 18, 2018 at 7:13am

Please explain the vac system

Thanks, Donnie Robinson

Comment by Steven Baynes on January 7, 2018 at 7:31am

Thanks Homer, its a blast to work on!

Comment by Homer Moyers Jr on January 3, 2018 at 9:21am

Wow, that is an impressive bench.  

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_