Kreg Owners' Community

Anyone have experience with attaching the Rockler dust bucket to the Kreg router table? Its designed attachment points interfere with the cross braces and leveling ears under the table.
Rob

Views: 401

Reply to This

Replies to This Discussion

I haven't had this specific problem but it sounds like you need to make a flange/spacer between the bucket and the table. Maybe made from two or three layers of plywood. This wouldn't be the first time for such a modification.

Thanks Trace.  Great minds think alike.  I did in fact build a plywood base that stands off from the leveling corners.  I drill ed a couple of holes through the center braces to hang it from.  It is a great set up because suction comes from behind and also below the bit, especially helpful when routing a large dado.  Anything that doesn't get sucked out the hose falls into the box and the door makes it easy to reach in.  It's really a great system.  Rob

The dusty deputy was my choice works well but  cheaply made should buy the heavy duty. It falls a part apart  held together like tupper ware after awhile the joints fail. I will look today at upgrade thanks to your post, Dusty deputy probably works better .

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_