Kreg Owners' Community

Connect with Kreg!

Latest Activity

Scott Kuykendall posted photos
Thursday
Eariyya replied to David Watson's discussion 'K5 Repair'
"Sounds like you're in a bit of a fix with your K5 jig! Losing that small ball from the ratchet…"
Feb 27
Eariyya replied to Ash's discussion 'Drill Collar Setting'
"Hey there! I totally get your frustration. It's always tricky when you upgrade and then…"
Feb 13
Sandy Brown posted a photo

Stools

Step Stools No screwscopy of Suman stool
Feb 12
Eariyya replied to Mike Kahle's discussion 'Standard fridge height'
"Hey there! When it comes to fridge height, there isn't a strict industry standard, but there…"
Feb 9
Sandy Brown posted photos
Jan 17
Eariyya replied to Homer Moyers Jr's discussion 'Ending this community'
"I have the presence on all the social media accoucnts, i have hired the social media agancy to…"
Jan 16
Eariyya replied to Jeff Varady's discussion 'The screw head is not flush'
"It sounds like the issue you're facing is with the screw heads protruding above the surface of…"
Jan 11
Eariyya replied to danny moore's discussion 'Standing desk idea'
"I begin every project by sketching with pencils and erasers. Begin by measuring the intended space…"
Jan 9
Patrick Halinski posted a discussion

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on…See More
Dec 30, 2023
Phil Knight commented on Youngwoo Seo's photo
Thumbnail

Kid's Round Picnic Tables

"Are there plans available for this table? Thanks."
Dec 28, 2023
Ed Anderson posted a discussion

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but…See More
Oct 3, 2023
Eariyya replied to Jeff Welsh's discussion 'Advice on assembling the "offset" bottom of a wall cabinet'
"It sounds like you've got a solid plan for your wall cabinet construction! Using pocket hole…"
Aug 24, 2023
Eariyya replied to Cary Medley's discussion 'Cleaning table saw blades'
"Hey there! I've had success cleaning my table saw blades by using a mixture of warm water and…"
Aug 21, 2023
Eariyya replied to Geoff Simpson's discussion 'Tools that you can't stand?'
"In every shop, there's a tool that's like that elusive scratch on a pristine glass…"
Aug 21, 2023
E M Hampton replied to Homer Moyers Jr's discussion 'Ending this community'
"I’m not on FB or any social media. Don’t wish to be either. That is why a website is so…"
Aug 15, 2023
 

Click a Button to Navigate the Kreg Owners' Community

Photos

  • Add Photos
  • View All




The Complete Pocket-Hole Kit for Building DIY Wood Projects

The new Kreg Pocket-Hole Jig 320 makes it easier than ever to build wood projects, using a simple setup process that gives you versatility to build with materials ½"-1½" thick. Features two drill guides, removable spacer, and convenient material-thickness stops.

With two main jig models plus a set of coordinated accessories to choose from, Kreg 300-Series Pocket-Hole Jigs provide the simplicity, versatility, and convenience you want, plus the durability and value you expect from the #1 pocket-hole brand—Kreg.

The System That Adapts to All of Your Cutting Needs

Conquer your cuts with the Adaptive Cutting System. Safely and easily rip, crosscut, cut mitered angles, and bevels in solid wood, plywood, and other large panels with confidence.

Professional-Level Accuracy, Control, and Precision

The Precision Router Lift helps you elevate your routing capabilities by providing precise control when making router setup changes or changing bits. The lift replaces the standard insert plate in a router table (the 3/8" x 9 1/4" x 11 3/4" plate fits all Kreg router tables plus many popular brands) and accepts 20+ popular router models—without the need for adapters or modifications—in a high-performance carriage that you raise and lower from above the table.

Kreg Clamping Solutions


Your perfect helping hand to hold 90° corners and “T” joints securely when assembling boxes, drawers, cabinets and cases. The 90° Corner Clamp leaves both of your hands free to add fasteners. It's the fastest, easiest-to-use corner clamp you can buy thanks to Kreg Automaxx® auto-adjusting technology.

By applying pressure from the side, rather than overhead, the In-Line Clamp stays out of the way as you work. A peg that fits into any 3/4" diameter hole holds the clamp in place, so the In-Line Clamp makes it possible to get more from any bench with dog holes—or any work surface where you can drill holes. The In-Line Clamp also makes a perfect companion to the Kreg Mobile Project Center.


The Bench Clamp Base makes it possible to use the power and convenience of Kreg Bench Clamps on any work surface, so you can create a versatile clamping station almost anywhere.

The Bench Clamp Base is a perfect companion to the Mobile Project Center, and allows you to get more from any work surface that’s equipped with 3/4" (20mm) bench dog holes. Or, you can simply drill a hole in any work surface, and easily attach the Bench Clamp Base, and just as easily remove it when not in use, or move it to another location.

Straight, Accurate, Splinter-Free Cuts Made Easy

Transform your circular saw into a high-performance, track-guided cutting system with the  Accu-Cut Circular Saw Guide Track System.

The Kreg Accu-Cut and Rip-Cut provide two great ways to turn your ordinary circular saw into a precision cutting tool. And each has some unique ways to help make cutting easy and predictable.

Make Any Place Your Workspace

The Mobile Project Center is a workbench, sawhorse, assembly table, and clamping station — all in one. 

Add the Perfect Final Touch to Your Projects


Kreg Hardware Installation Solutions make it easy to add the perfect final touch to your projects by allowing you to confidently install knobs and pulls, concealed door hinges, drawer slides, and adjustable shelves.

Take Your Kreg Joinery Projects to the Next Level

With the Custom Pocket-Hole Plug Cutter, you can use pocket-hole joinery virtually anywhere — even in places that show prominently on projects — by hiding pocket holes with perfectly matched plugs that you create from any wood you desire.

Kreg Clamps with Automaxx® Auto-Adjust Technology

Automaxx Technology makes clamping faster and easier than ever by adjusting automatically to clamp materials that are thick, thin, or in between. You’ll find Automaxx on the Right Angle ClampWood Project Clamps, Bench ClampsBar Clamps, and Kreg Clamp Table.

 
 
 

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_