Kreg Owners' Community

Tree House

8x10 with a fold down steps in the floor.

  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by J Lama on December 20, 2016 at 6:02pm

Very nice and great inspiration!

Comment by Stephen M. Coon on May 17, 2016 at 3:04pm

Bill Im sorry I did not have any drawings, The play house is just standard 8x8 with 2x4 walls on 16in. centers and the rafters are 2x4 on a 24in. center with a 2'x4' pitch. The porch is 2'x8' the decking is 3/4" treated plywood and the 2 corner post are 4x4s raped with 1x6 common wood and the hand rail is 2x4 upper and lower rails and the spindles are 2x2s. If you need any more details feel free to contact me on my post.

Comment by Bill Whitney on May 17, 2016 at 10:17am

I would be interested in the project plans, I think I could modify into a playhouse for my granddaughter.

Really a nice contruction, great work

Comment by michael evans on May 16, 2016 at 1:09pm

Nice job Stephen ,that was alot of work.

Comment by Stephen M. Coon on May 16, 2016 at 11:34am

its all wired with recessed can light. all outlets and lights are on GFI.

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_