Comment
I can make plans for you if you want, just let me know what the thickness of the material you will be using and if you would like to put a face frame on it. I like the face frame because it really adds strength to any cabinet and keeps if from racking.
Hello Larry, Welcome to the group. You really don't need plans. I haven't used any plans for any of my projects. If you're new, I suggest making a small box like 12X12X12 with a small door to experiment first, then tackle a larger projects. You will find after you get the hang of using Kreg Jigs, you will be able to just make anything with the plans in your head. If you've done just handyman work around your house, you will find using the Kreg jigs easy to use. I also learned a lot from the Kreg company site. Here is a link to some of the videos which taught me tons of info! You may have to copy and paste the link in your address bar. Good Luck!
https://www.kregtool.com/get-inspired/videos.aspx?i=OFaUlDWXarHbhpx...
New to this! I want to build a storage cabinet with two doors, 75" high, 48" wide and 14" deep. How do i get some plans of this type of project? Anyone?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community