Tags:
I tore out this old fireplace....
...and replaced it with this fireplace and matching wainscoat.
This is an after photo of my kitchen renovation. I made my first set of cabinets.
Fabulous. Just what I want to do. The corner cabinets must have been
a bear to design and build. Any advice?
Do you a over-the-stove vent built into your microwave?
You must be very proud of your finished accomplishment.
art
david sims said:This is an after photo of my kitchen renovation. I made my first set of cabinets.
Not there are any pocket holes in this (all mortise and tennon), but this was my first decent project I completed. I've done some larger things with wood, but seeing as I did the upholstery on this too it is my stand out favourite project at this time.
Another View
Those kitchen cabinets just look like they are done by some professional. Good job. I have searched for more cabinetry designs if anyone is interested they can look here. Once again I have got to say, great job on those kitchen cabinets.
david sims said:
This is an after photo of my kitchen renovation. I made my first set of cabinets.
This is the flag that was presented to my Brother In Law by the local VFW when John was laid to rest. His Daughter,, my Wife,, chose the Quilted Maple & the background cloth. I merely had the honor of putting it all together. The shop was oddly quiet each day I worked on it. Even had a few sweaty eye moments doing this for my BIL.
Fine job!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service