Thanks Jim, I have started a bathroom vanity and its coming out better then expected. Ill post some project pics when its completed. Thanks for the response.
The work process that you have is much the same for me, The only difference is i joint everything before doing a thickness run, possibly the thicknesser will do the same work if the boards are reasonable. I actually made a table from pallets it on the Kreg Site somewhere if you wanted to see just what sort of results you can get.
I currently subscribe to Woodsmith eTips and enjoy receiving their video tips and read tips. I’ve come across several over the past couple of years that have helped me in my shop and today’s tips included a simple low cost Moxon style vice that I think several of you may want to build.
You are very welcome Charles. You can also use the wax on the face of your hand plane. Just scrible a few lines on it and it will glide smoothly over your work surface.
Thank you Jim, I am honored to be your friend. I really enjoy looking at photos your work, your a very talented woodworker. l look forward to your friendship.
Your work is pretty nice too, I like the computer desk you made. My wife wants me to build a coffee table and a couple of accent tables next and a friend of mine is giving me an old water bed that I am going to re-saw and re-purpose.
Excellent work, Jim! I've only done one large project thus far, but I can appreciate the fine work you do with flush fit doors and drawers. You've done a lot in your projects and it seems that you have got it down. Especially critical with a white finish.
I also appreciate that you (and others) put pics of the assembly processes of your projects on this site. It's a great way for us new woodworkers to learn new techniques.
At 1:41pm on September 29, 2010, Clayton Weed said…
Love your style. Do you build from plans or just shoot from the hip? Do have a plan for the bathroom mirrors?
You do nice work!!!!! I need to learn more about drawers.
At 7:11pm on September 21, 2010, Jim Delorme said…
You are welcome. I really enjoy my jig and I make a point to show it to everyone that visits my home. I'm just starting to build my garage shop and have incorporated it into my one wall bench first that way I can use it to build the rest of the shop.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
Jim Delorme's Comments
Comment Wall (16 comments)
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community
Thanks Jim, I have started a bathroom vanity and its coming out better then expected. Ill post some project pics when its completed. Thanks for the response.
Jim,
The work process that you have is much the same for me, The only difference is i joint everything before doing a thickness run, possibly the thicknesser will do the same work if the boards are reasonable. I actually made a table from pallets it on the Kreg Site somewhere if you wanted to see just what sort of results you can get.
I currently subscribe to Woodsmith eTips and enjoy receiving their video tips and read tips. I’ve come across several over the past couple of years that have helped me in my shop and today’s tips included a simple low cost Moxon style vice that I think several of you may want to build.
http://www.woodsmithtips.com/2012/10/25/easy-to-build-vise/
If you haven’t already, I encourage you to subscribe as well
Thanks Woodsmith!
Jim
You are very welcome Charles. You can also use the wax on the face of your hand plane. Just scrible a few lines on it and it will glide smoothly over your work surface.
Paraffin wax
oooh, ok! thanks! (learned) jajaja
Thanks Jim
Thanks Karsten,
Your work is pretty nice too, I like the computer desk you made. My wife wants me to build a coffee table and a couple of accent tables next and a friend of mine is giving me an old water bed that I am going to re-saw and re-purpose.
TTYL
Jim
Excellent work, Jim! I've only done one large project thus far, but I can appreciate the fine work you do with flush fit doors and drawers. You've done a lot in your projects and it seems that you have got it down. Especially critical with a white finish.
I also appreciate that you (and others) put pics of the assembly processes of your projects on this site. It's a great way for us new woodworkers to learn new techniques.
You do nice work!!!!! I need to learn more about drawers.
Welcome to
Kreg Owners' Community
Sign Up
or Sign In
Or sign in with:
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
New Members: Please Introduce Yourself!
Kreg KMS7102 Table Saw Precision Miter Gauge System and the DeWalt 745 Table Saw
Bench
Bench1
Videos
Miter Saw Workbench
Added by Mike Criss
The Ottoman with Secret
Added by Alex DrMaster
How to Build a Shaker Fireplace Surround - Woodworking
Added by Philip Miller
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service