Kreg Owners' Community

On the Kreg website there is a video with Gary Streigler building (3) upper wall cabinets with face frames, below the video is a link to doen the cut sheet and parts list but there is no detailed plan for building the cabinets. Is there some where on the site that a detailed plan can be found and downloaded to be printed out?

Views: 617

Reply to This

Replies to This Discussion

John,
I didn't see anything like that, what part of assembly did you have questions on?
http://www.youtube.com/watch?v=jYdCv5R786c
Here is the link I beleive he is referring .
Hey thanks guys I looked at the single cabinet construction that Chuck and Robert are referring to which that will work - i checked out the video and thought the complete plans would be there ie: hinges used, location of pocket holes etc. But the plan for the single cabinet will get it done, thanks for your responses it is appreciated.

John
John,
I built these cabinets from the plans and it was fairly simple. They turned out nice. I watched the three videos several times and if I was not sure about the next step, I would go back and view them again. Just take your time and you can build these with good results. Be confident!

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_