Kreg Owners' Community

This question has been on my mind for a long time. When I got my Kreg Pocket Hole Jig, my first project was the workbench. At that time the HD Jig for 2x4s was not yet available. So, my question is, would/should I use the HD jig to build that workbench today? There certainly isn't any problem with my first WB, but it is 2x4s and that is what the HD was designed for.

Anybody done that yet?

Thanks, Steve

Views: 340

Reply to This

Replies to This Discussion

Steve,

You should get satisfactory results using the jig you have; however, I'd use 2-1/2" long screws.

I don't have the plans in front of me, but I think that is what they call for and what I used.

 Thanks

Steve,

When drilling pocket holes, use the required amount of spacer blocks on the jig, for the intended material thickness.

You want the screw exiting in the center of the workpiece, that you are drilling the pocket hole into.

Make sample test pieces to insure your getting adequate thread engagement.

The deeper the threads engage, the stronger joined member you'll have.

None of that was my question... My question was simply whether to use the standard jig or the HD jig which uses a larger diameter screw for 50% more strength. Since the HD jig was designed for 2x4s for benches and outdoor furniture and such, I decided to go ahead and use it. Got all the machine work done today and tomorrow I will do the assembly.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_