Kreg Owners' Community

Im looking for plans for an outdoor chair or bench. Any Links or PDFs would be GREAT!

Matt

Views: 612

Reply to This

Replies to This Discussion

Matt,
Here's a link to our project plan page. The only one we have currently that might be a fit for what you're looking for is our "Potting Bench" plan. If you're looking to make an adirondack chair, I'd recommend checking out Lowes' Shop Class where they do a step-by-step video project along with the plans you can download on their site.

If neither of these two options work for you, I'd recommend you make a trip over to www.plansnow.com. Most of their project plans don't utilize Kreg Jigs, but almost all of them can be adapted to do so. You've just got to do some thinking on how to compensate. For instance, if they're having you connect the two pieces of wood via Mortise and Tenon with a 1" tenon on each side, you're going to need to reduce the length of the workpiece by 2" to use your Kreg Jig. In the end, you'll be making whichever project plan you choose to undertake much faster and easier by doing so.

Good luck! I hope you find what you need!
matt
i keep a lot of wood working books on hand and i can scan some plans for you if you like i keep them for my customers full color books help them with wkat they what.you need to go to woodworkersbookclub.com
dave
Hi Matt
Did your find the patio furniture plans
If so can I get a copy just wanted tell you thanks I'm so just wanted tell you thanks I'm so looking forward to looking for by your house

Corner Chair

Armless Chair

The above both are using 1x4

Modified version of above using 2x4

I finished the complete sectional using 2x4 Cedar and it turned out fantastic. I will wait for 1 season for weathering and then stain it using TWP or Armstrong Clark stains.

Outdoor dining table and matching bench

Here are the photos of my semi-completed work. This was my first wood working project.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_