Hi everyone , I want too make a mobile table saw cart with some storage .My dewalt tablesaw came with a stand but it takes up to much room in my little 12x12 shop .Will probably have a fold down extension wing on the left ,anyone made one ? The cart will be 2feet x 2feet square approx. Any pictures would be great .
Tags:
micheal,
derek kieller posted a cart he made for a planer/thicknesser it has a fold down side and everything might give you some ideas or at least somerwhere to start. the bench i built will be too long for your shed.
jock
Thanks jock how you doing ?Have you got arm ache yet holding that massive beer glass up ha .
Michael, Here are some pictures (Facebook link, you don't need an account to view) of the one I made. I have a one car garage. The mobile work station houses my table saw, miter saw, router table and Kreg Jig station in one. I need to post more pics of the finished product. To give credit where credit is due, below my post is the LumberJocks project I used for reference.
Mine (in progress, it's done now, you get the idea):
https://www.facebook.com/wwoodwarrior/photos/pb.607909999277380.-22...
https://www.facebook.com/wwoodwarrior/photos/pb.607909999277380.-22...
LumberJocks:
http://lumberjocks.com/projects/96606
Good luck, this is really, really handy.
Here is the table saw cart I built. I also attached my Ryobi router table to the end of it. It's a little bigger than you are looking for but it might give you some ideas. The base is made of 2x4s and the sides and shelves are MDF. I also added a face frame to dress it up a little. The base is on locking casters. All parts are joined with glue and pocket holes.
Hi Justin many thanks for the photos ,i have now got a seed planted in my mind what I want to do .Will make of 3/4 ply measureing 20" square with a drop down leaf on the left side .Soon as I have finished this bathroom remodel I will be on it ,go steady mick.
Hi nick thanks for the pics ,a picture speaks volumes .Like your set up with the built in router table .Now I know what I am aiming for thanks ,mick.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service